Why Is My Printer Zebra Not Printing With Barcode?

0 Comments

Why is my printer not printing barcodes?

Users have reported that some printers can not print barcodes on their documents. This problem is caused by your printer not having a postscript driver available. Postscript is a printing language used by a wide range of printer manufacturers.

How do I fix the barcode on my printer?

Red Printer Light

  1. Turn the printer’s power off.
  2. Turn the printer’s power on.
  3. Press the FEED button to ensure that the printer is not in pause mode.
  4. Ensure that labels are properly loaded. See Loading Labels in Your Barcode Label Printer.
  5. Ensure that the print head is completely closed.

Why is my Zebra label printer not printing?

Offset Printing and/or Multiple Labels Feeding at Once To solve this problem, you simply need to calibrate the printer. Right-click on the Zebra Designer printer and select ” Printing Preferences”. Select the “Advanced Setup” tab, then click on the “Calibrate” button in the lower-right corner (see image below).

Can I print barcodes on my printer?

Select and setup your printer – You can print barcodes on any ink jet or laser printer using label sheets. If you have a Dymo LabelWriter printer select either the 30252 address labels or 1738595 barcode labels. The address labels normally work best, they are easier to find in stores and are bigger.

You might be interested:  Quick Answer: What Is The Number 118071 In A Barcode?

Why is my Rollo printer not printing clearly?

If your barcode is not printing clearly, the source file wasn’t created in the ideal quality. Please try reducing your print speed (try 3mm/second) and your print density (try 3 as well) to see if you obtain a better result.

How do I get my Zebra printer to print?

Click the “File” tab and select the “ Print ” option. Under the ” Printer ” option, select ” Zebra.” Click the ” Print ” button to send the label to the Zebra printer.

How do I change the settings on my Zebra printer?

To change the label settings:

  1. Search on your Windows computer for the Control Panel and click on View Devices and Printers:
  2. Right-click the Zebra printer and go to Printing Preferences.
  3. Select the Stocks tab and then New.
  4. This allows you to enter different custom options for your label.

Why does my barcode scanner not work?

Make sure the symbology is enabled in the scanner for the barcode you are scanning. Check the minimum and maximum character settings and the scanner settings for that symbology. Check that there isn’t a scanner setting that prevents your code scanning.

How do you troubleshoot a label printer?

The first thing you should do when your label printer is acting up is: check all the hardware! Open the printer. Make sure there is paper, with the label side facing up. Reset the paper, close the printer and hit the feed button, just to double-check!

How do I fix my barcode?

Low-contrast barcodes will also reduce the distance at which a barcode can be read. Solution: Adjusting your printer settings to ensure that ink is distributed evenly across your label (or other surface) is a good first step to avoid low contrast barcodes. It’s usually the surface, though, that’s the problem.

You might be interested:  Readers ask: Where Is The Barcode Scanner In The Weight Watchers App?

How do you troubleshoot a Zebra label printer?

If that doesn’t work, try a full calibration:

  1. Insert the roll of labels you plan to print from.
  2. Hold down the feed button.
  3. Wait for the group of seven flashes, then release the feed button.
  4. A re-calibration process will take place.
  5. When the process is complete the printer will feed out a single blank label.

How do I reset my Zebra printer label?

Hold down the forward feed button on the front panel. The indicator light will start a flash sequence: 1, 1-2, 1-2-3, and so on. When it flashes four times, release it. This resets the printer to factory defaults.

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Post